Cool Fire 4 40w Regulated Mod By InnokinInnokin
The Coolfire 4 from Innokin is the newest in the line of internationally bestselling Coolfire vaporizers. This new version is super sleek with an ultra high quality look and feel. It is one of the most beautifully designed mods we've ever had the pleasure of trying. We especially like the on/off switch at the base of the Coolfire 4.
The Innokin Coolfire 4 features a greater range of variable voltage, variable wattage, advanced safety features, portable electronics charging and also "vape while charging technology. The Coolfire 4 has a flush 510 connection with a spring loaded positive pin, durable stainless steel threading, and an included ego adapter. The Innokin Coolfire 4 has a variable voltage range of 3.0v to 7.5v in 0.1 volt increments and a variable wattage range of 6.0w to 40.0w adjustable in 0.5 watt increments.
The Coolfire 4 uses Vrms DC current for increased accuracy with a power deviation of 0.1 watt. The full 40 watts is precisely maintained between 0.3 to 2.5 ohms. There is no wasted power and exact accuracy means you are always vaping the power level that you choose.
Coolfire 4 Features and Specs:-------
Dimensions: 3-3/8"L x 1-5/8"W x 1"D
Spring Loaded/Stainless Steel 510 Thread
On/Off Switch on the base
3 Click lock/ unlock Feature
Vrms Power Regulation
Micro USB Charging Port "Vape while Charging"
Heat Dissipation Vents
Battery Level Indicator
Flip OLED Orientation
15 Second Cutoff Timer
Operating Voltage: 3.0V - 7.5V
Operating Wattage: 6.0W - 40.0W
Built In 2000mAh Battery
Standby current: 100uA max
Maximum output Wattage: 40W
Maximum output Currentï¼12A
Maximum output Voltage: 7.5V
Clearomizer Resistance: 0.3 Ohm (minimum)
Charging: Micro USB DC 5V/1A
Variable Voltage:-Voltage can be adjusted from 3.0 - 7.5 volts in .1 volt increments.
Variable Wattage:-Wattage can be adjusted from 6.0 - 40.0 Watts in .5 watts increments.
Low Voltage Warning:-The Red LED and Battery bar will continue blinking when the battery capacity is lower than 3.3V and the device will automatically power off.
Short Circuit/Atomiser Protection protects the device against shorted atomizers and will stop the unit from functioning in unsafe conditions.
The Innokin Coolfire 4 features automatic real-time atomizer Ohms detection. If the resistance of the atomiser is lower than 0.3 the Ohms bar will blink and the Innokin Coolfire 4 will not power on.
"Vape while charging" Technology
The Innokin iTaste Coolfire 4 is recharged with a Micro USB cable. When plugged into a power source the Innokin Coolfire 4 can also be vaped and charged at the same time with Innokin Technology's "Vape while you charge- pass-through technology".
Remembers last Voltage or Wattage setting:
When the Innokin Coolfire 4 is turned off it will remember the current voltage or wattage setting and it will retain the setting when the Innokin iTaste Coolfire 4 is powered on.
High compatibility 510 connector:-The Innokin Coolfire 4 510 threading is compatible all standard 510 clearomizers & atomisers
The Innokin Coolfire 4 monitors the battery voltage and will automatically power off if the battery is over discharged.
Built in Puff Counter